Universal Battery Vinga 10000 mAh Wireless QC3.0 PD soft touch blue (BTPB3510WLROBL)

Is 10000 mAh a lot or a little? It's enough to fully charge a modern smartphone from zero 2-3 times. At the same time, it's not too much, so you won't have to charge the power bank for too long. With a standard charger, the charging time will be 5-6 hours, and with fast charging - three times faster!

The Vinga 10000 mAh Wireless QC3.0 PD soft touch uses the latest generation lithium-polymer battery. It has a low self-discharge rate and lacks the "memory effect" typical of previous generation batteries. Plus, it offers excellent longevity - up to 500 full charge cycles while maintaining at least 70% of the initial capacity.

This model has two: Micro USB with an input voltage of 5V and a current of 2A, and USB Type-C with Power Delivery 2.0 support. It works both ways, meaning you can charge the power bank and charge your devices from it through the same USB Type-C port. Moreover, this can be done significantly faster than through the standard Micro USB. The Power Delivery 2.0 protocol allows for a charging power of up to 18W (9V-2A). Thus, with an appropriate charger, you can charge the battery twice as fast as with a 2A charger (and 3.5 times faster than with a standard 1A).

Vinga 10000 mAh Wireless QC3.0 PD offers three options for charging devices.

1. USB Type-A port with Qualcomm Quick Charge 3.0 fast charging technology support. This technology allows delivering up to 18W of charging power to the device, significantly (2-3 times) speeding up the charging process. A large number of V-A combinations are supported for compatibility with virtually all existing types of devices (DC 5-6.5V/3A, 6.5-9V/2A, 9-12V/1.5A).

Of course, all this happens without negatively impacting your device's battery, as the "smart" system analyzes the initial battery charge, its wear, and many other parameters to make the process as fast and safe as possible.

2. USB Type-C port with Power Delivery 2.0 fast charging technology support. The fast charging technology also allows delivering up to 18W of charging power (5V/2A 9V/2A 12V/1.5A) and is an excellent complement to the previous port. You can always connect any of your devices to one of these ports and achieve compatibility with one of the fast charging technologies. Also, remember that this port can also be used for fast charging the Vinga 10000 mAh Wireless QC3.0 PD. By the way, if you need to charge an "old" or "simple" device, any of these interfaces provides compatibility with them without problems.

3. Fast wireless interface according to the Qi standard with a charging power of up to 10W (DC 9V/1.1A, 5V/1A). A feature for the latest advanced smartphones and their owners. All you need to do is simply place the smartphone on the power bank and turn it on. Charging will start automatically! The fast wireless charging option of 10W is supported (it is worth remembering that the energy transfer efficiency for any wireless charging is approximately 80%).

With Vinga 10000 mAh Wireless QC3.0 PD, you don't have to worry about the devices you charge from it or the power bank itself. It has built-in hardware:

• short circuit protection
• overcharge protection
• complete discharge protection
• overcurrent protection
• overheating protection.

The body is made of high-quality plastic with a soft touch coating and fire-repellent properties. Pleasant to the touch and durable. In the center of the body, there is a rubberized circular surface to prevent the smartphone from "sliding" off the power bank during wireless charging. An indicator with 5 LEDs is also installed to show the charge level. The compactness and light weight deserve special attention: the Vinga 10000 mAh Wireless QC3.0 PD weighs just over 200g!